User Guide

42
- Velocity Release
- Pressure (AT)
- Keyboard CV
- Touch Surface X
- Touch Surface Y
- Touch Surface A
- Mod1
- Mod2
- LFO Rate
- Glide Rate
- Mod.Wheel Amount
- Pedal Amount
- Osc.1 Octave
- Osc. 1 Waveform
- Osc. 2 Frequency
- Osc. 2 Octave
- Osc. 2 Waveform
- Osc. 3 Frequency
- Osc. 3 Octave
- Osc. 3 Waveform
- Ext. Audio Level
- Osc.1 Level
- Osc. 2 Level
- Osc. 3 Level
- Noise Level
- Filter Cutoff
- Filter Spacing
- Filter Resonance
- Filter KB Control Amount
- Filter Attack
- Filter Decay
- Filter Sustain
- Filter Release
- Filter Envelope Amount
- Volume Attack
- Volume Decay
- Volume Sustain
- Volume Release
- Master Volume
- Headphone Volume
The Fixed Value can be used by itself or added to one of the Shaping sources. It has a course
adjustment, called “High” and a Fine adjustment, called “Low”. Both the High and Low values are
adjustable from -64 to +64. The CURSOR button moves the cursor between the Shaping Source, the
High fixed value and the low fixed value.
3.3 KEYBOARD MODES
KEYBOARD MODES allows the user to select 1 of 4 types of keyboard priority for a preset. Keyboard
priority for a monophonic instrument determines what happens when more than one key is depressed.
Enter EDIT mode and use the +1 or –1 button to highlight KEYBOARD MODES. Press ENTER and the
current Keyboard Mode appears. Use the +/-1 buttons to choose from one of the following options.
Lower Key (the lowest key pressed sounds)
Higher Key (the highest key pressed sounds)
Last Key (the most recent key pressed sounds)