User Guide

44
TS-X Amount: 100%
The parameters for each touch surface axis are: touch surface destination, the MIDI CC being
transmitted, the direction of control, and the amount (for X,Y, and A only). To get back to the Touch
Surface menu, press ENTER. To return to the Edit Menu then press CURSOR or EDIT.
DEST.: Voyager users can choose one of 32 destinations for the Voyager’s touch surface
outputs X, Y and A, and 14 destinations are available for the touch surface gate. Here is a list
of the destinations:
X, Y, and A
− LFO rate
− glide rate
− mod wheel mod bus amount
− volume
− pedal/on mod bus amount
− osc 1 waveform
− osc 2 frequency
− osc 2 waveform
− osc 3 frequency
− osc 3 waveform
− external audio in level
− osc 1 level
− osc 2 level
− osc 3 level
− noise level
− filter cutoff
− filter spacing
− filter resonance
− filter KB amount
− filter attack
− filter decay
− filter sustain
− filter release
− filter envelope amount
− volume attack
− volume decay
− volume sustain
− volume release
− key cv (pitch of all 3 oscillators across range of keyboard)
− osc 1 octave (pitch of single oscillator across range of keyboard)
− osc 2 octave (pitch of single oscillator across range of keyboard)
− osc 3 octave (pitch of single oscillator across range of keyboard)
T.S GATE:
− No Switch (default)
− Glide Switch
− Release Switch
− Osc. 1à 2 Sync switch
− Osc. 3-à1 FM switch
− Osc. 3 KB Control switch
− Osc. 3 Frequency Range switch
− External Audio On/Off switch
− Osc.1 On/Off switch