User`s manual

8
ASSEM B LY
Putting together your Werkstatt is easy. No soldering is required, and all of
the electronic components have been pre-assembled. The only tools you
will need are a #1 Phillips [ + ] screwdriver, and a good pair of scissors. And
while assembly is not complicated, it is important to follow each step, in
order. Be mindful that you are working with electronics, so a good measure
of caution and care is always in order.
A NOTE ABOUT ELECTROSTATIC DISCHARGE:
You may have noticed that little electric shock you sometimes receive
when you touch something like a metal doorknob. This is called elec-
trostatic discharge, and it can be harmful to electronic components. To
protect the circuitry when you are assembling your Werkstatt, leave the
circuit board in its protective anti-static sleeve until you are ready to install
it. Also, take a moment to ground yourself by touching a metal surface or
grounded object before you handle the circuit board.
PARTS LIST
UnpackyourWerkstattsynthesizerkitandmakesureallpartsarepresent
and accounted for before you get started.
A) Werkstatt-Ø1PrintedCircuitBoard(PCB) x1
B) BottomChassis(metal) x1
C) TopPanelwithsilkscreenedprinting(metal) x1
D) 12VoltDCpoweradapter x1
E) HardwareKitcontaining:
 a) Keyboardbuttoncaps x13
 b) 1/4”Sheetmetalscrews(Black) x4
 c) 1/4”Panheadmachinescrews(Silver) x5
 d) Blacknylonwasher x1
 e) Blacknylonhexnut X1
 f) Rubberfeet x4
 g) PatchableHeadercables x5
F) SerialNumberlabel x1