Product specifications

Driver’s Seat & Seat Adjustment

The Rise-R Seat is a unique

driver seat enhancement.

The front edge of the driver’s

seat cushion lifts up to give

the driver a taller sightline.

To switch the seat to the

raised position, use two

hands to lift and push the

front edge of the seat

cushion up and back until it

is sitting on the rear half of

the driver’s seat cushion. To

switch to the lower position,

use two hands to push the

Rise-R seat cushion forward

and down.

Be careful of the articulating hinge. Do not place fingers or other objects in the hinge mechanism during use.

The driver’s seat may be adjusted forward or backward by moving the lever below the front of the seat. Use body

pressure to move the seat to the desired position. Release the lever then check to feel the seat lock into place.

After adjusting the seat, be sure that it has locked into place by pushing forward and backward until it has

securely latched.

DO NOT attempt to adjust the driver’s seat while the boat is moving.

Motor Box Cover

The motor box encloses the inboard engine and quiets

engine noise. When opening, stand on either side, grasp

the handle and pull up and back at an angle. If the engine

requires maintenance, open the box lid until it rests open.

Never open the Motor Box while the boat is moving!

Some Moomba models DO NOT have mechanical

devices to hold the motor box cover in the open position.

Please use caution to prevent accidental closing.

V-Drive Engine Compartment

To access the engine compartment, turn latch and pull to

raise the center sun deck lid. When the ski lockers and engine

compartment lids are closed, the upholstered lids double as

a cushioned sun deck.