Product specifications

Washing and waxing the boat hull and deck regularly will

extend the life and beauty of your Moomba. It is a good

routine to rinse your boat with fresh water after each day’s

use.

It is recommended that the hull and deck be cleaned and

waxed after every 50 hours of use. This will decrease water

friction and lessen the potential for staining or spotting on

the gelcoat surface.

When the original gelcoat shine cannot be restored by

waxing, the shine may be restored by hand buffing with a

commercial polishing compound . Be sure to apply a new

coat of wax containing Carnauba over the area that has been

polished.

IMPORTANT: Porcelain cleaning powders are too

abrasive for use on gelcoat and may cause permanent

discoloration if used. Household detergents containing

ammonia or chlorine should not be used on gelcoat.

Never use acetone or ketone solvents to clean your boat

finish.

Fiberglass Care

Rub Rail Care

Use a sponge or other soft material to wash and wax the rub

rail.

To wax, use a commercial automotive bumper wax.

NOTE: When tying up to a dock or another boat,

always use cushioned fenders (dock bumpers) to

protect your boat from hard surfaces.

Washing Your Moomba

The easiest way to preserve the beauty of your boat is to

keep it clean by frequent washing. Wash the boat with luke

warm or cold water. Wipe the boat down immediately after

washing to avoid water spots. Avoid using hot water or

washing your boat in direct sunlight. Avoid using strong soaps

or chemical detergents. To avoid spotting, all cleaning agents

should be thoroughly rinsed from the surface promptly and

not allowed to dry on the finish.

Windshield Care

Clean the windshield regularly to ensure that visibility is not

obstructed.

Use a commercial glass cleaner to remove any spotting or

stubborn stains that develop on the windshield.

Never use abrasive cleaners on glass or plastic surfaces as

they may cause scratches.

Section X

Cleaning, Care & Storage