Owner`s manual

MOON CD 5.3 CD Player
Remote Control Operation
The MOON CD 5.3 CD Player uses the ‘FRM-2’ full function, all aluminum remote
control (figure 3). It operates on the Philips RC-5 communication protocol and is can be
used with other Simaudio MOON components.
The ‘FRM-2’ remote uses three AAA batteries (included). To install them, use the
supplied Allen key to remove the three screws located on the back plate; insert the
batteries in the correct direction and then screw the back plate back into place.
To operate the CD 5.3 with this remote control, you must first press the button labeled
‘CD’ on the top left corner.
The lower section of the ‘FRM-2’ has nine (9) buttons which operate the CD 5.3. All of
these functions are available on either the top panel or front panel of the CD Player.
Please refer to these aforementioned sections for a more detailed description of each of
these buttons:
X Play the compact disc loaded into the player
 Skip to the previous track on the disc
 Skip to the next track on the disc
 Scan backwards through the current track of the disc
 Pauses the player
 Scan forward through the current track of the disc
2 Repeat the entire disc or the current track
 Stop playing the current track
S Open/Close the CD drawer
Figure 3: FRM-2 Remote Control
___________________________________________________________________________
Remote Control Operation 11