Owner`s manual

260D Nēo Series
Specifications
Configuration Single-Ended
Power Supply Transformer 25VA
Power Supply Capacitance 19,800μF
Digital Outputs (2) S/PDIF (RCA), AES/EBU (XLR)
Remote Control Full-Function CRM-2
Power Consumption in Standby 0.5 watts
AC Power Requirements 120V / 60Hz or 240V / 50Hz
Shipping Weight 16 lbs / 7.5 Kgs
Dimensions (W x H x D, inches / cm.) 16.9 x 3.4 x 13.1 / 42.9 x 8.6 x 33.3
Optional 32-bit Digital-to-Analog Converter:
Digital Filter / Digital-to-Analog Converter 32-bit
Frequency Response (full range) 2Hz - 100kHz +0/-3dB
THD @1kHz, 0dBFS (A-weighted) < 0.005%
Intermodulation Distortion < 0.005%
Dynamic Range > 120dB
Signal-to-noise Ratio > 120dB @ full output
Channel Separation > 116dB
Low Level Linearity < ±0.25dB at -90dBFS
Intrinsic Jitter 1 picosecond RMS
Analog Outputs – Balanced / Single Ended 1 pair XLR / 1 pair RCA
Analog Output Impedance - XLR / RCA
75Ω
Max. Analog Output @ 0dBFS - XLR / RCA 2.0 Volts
Bit-depth range / Sampling Frequency 16 to 24 bits / 44.1kHz to 192kHz
Digital Inputs (4) 2x S/PDIF (RCA), 1x TosLink, 1x USB
Balanced Pin Assignment:
Pin 1 Ground
Pin 2 Positive
Pin 3 Negative
NOTE: If you require the RS-232 codes for your Nēo 260D, please visit the "Contact Us" page
and complete the "Information request" form on our website at www.simaudio.com
.
14
Fuse Replacements: F1 All versions use 0.5A slow blow (5 x 20mm size)
F2 : 120V version uses a 0.2A slow blow (5 x 20mm).
230V version uses a 0.1A slow blow (5 x 20mm).