Owner’s Manual MOON Series PSX 5.
MOON PSX 5.3 Power Supply Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves or another apparatus that produces heat. 9.
MOON PSX 5.3 Power Supply Important Safety Instructions (cont’d) The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
MOON PSX 5.3 Power Supply Table of Contents Congratulations ............................................... 5 Unpacking and Warnings ................................... 5 Introduction .................................................... 6 Installation & Placement ................................... 6 LP5.3 Internal Settings ..................................... 7 Rear Panel Connections ..................................... 8 Operating the PSX 5.3 ....................................... 9 Specifications ..
MOON PSX 5.3 Power Supply Congratulations! Thank you for selecting the MOON PSX 5.3 Power Supply as a part of your music system. This component has been designed to offer state-of-the-art high-end performance in an elegant package, while retaining all the sonic hallmarks on which Simaudio has made its reputation. We have spared no effort to ensure that it is provides a significant improvement to the sonic performance of your MOON LP5.3 Phono Preamplifier.
MOON PSX 5.3 Power Supply Introduction Your MOON PSX 5.3 Power Supply incorporates many significant design features to enhance the “world class”performance of your MOON LP 5.3 Phono Preamplifier. This is an abbreviated list of the more important features: High quality toroidal transformer. 4 stages of DC voltage regulation. Total capacitance of 35,200uF. Dual choke inductance (2x 200mH). Special "pi-type" filter after initial voltage rectification stage to reduce AC transmission noise.
MOON PSX 5.3 Power Supply LP 5.3 Internal Settings A B A B Figure 1: MOON LP5.3 Circuit Board layout Prior to connecting your MOON LP 5.3 Phono Preamplifier to the MOON PSX 5.3 Power Supply, you must move two (2) internal jumpers inside your MOON LP 5.3. Please refer to page 8 of your MOON LP5.3 owner’s manual for detailed instructions on how to remove the chassis cover. Referring to the above diagram of the LP5.3, you will see an array of four (4) jumper sockets labeled STR1, STR2, STR3 and STR4.
MOON PSX 5.3 Power Supply Rear Panel Connections Figure 2: MOON LP5.3 Rear panel Figure 3: MOON PSX 5.3 Rear panel The rear panel of the MOON PSX 5.3 will look similar to Figure 3 (above right). There is a 4-pin female XLR connector, labeled “DC output”, located on the left side. On the right side are the the power “main switch” and IEC receptacle, labeled “AC Input”. To connect the MOON LP 5.3 Phono Preamplifier to the MOON PSX 5.3 Power Supply, follow these steps: 1.
MOON PSX 5.3 Power Supply Operating the PSX 5.3 Since your MOON LP 5.3 Phono Preamplifier is not equipped with its own on/off power switch, powering it on and off is accomplished via the MOON PSX 5.3 Power Supply’s on/off switch, located on the rear panel. We recommend that you leave your MOON PSX 5.3 Power Supply powered up at all times to maintain optimal sonic performance. In the event that you plan to be away from your home for a few days, powering off the MOON PSX 5.3 may not be a bad idea.
MOON PSX 5.3 Power Supply Specifications MOON PSX 5.3: Transformer ............................................................ Total Capacitance ................................................... Total Inductance ..................................................... Power Consumption ................................................ AC Power Requirements ......................................... Shipping Weight ..................................................... Dimensions (W x H x D, inches) .........
