Installation & Assembly

3
1.)
R EAD T HROUGH I NSTRUCTIONS FROM BEGINNING
TO END BEFORE STARTING TO ASSEMBLE UNIT .
Assembly Instructions
Illustration # 1
2.)
Illustration # 2
3.)
Identify and seperate all the parts and hardware.
Set the Insert Leg (P2) to the desire height and secure
to the Upper Leg (P1) using two Lock Washers (B) with
two Phillips Screws (A) as shown in illustration #1.
P1
A
P2
B
Place each leg over the embedded threaded inserts in the bottom of the Table Top (P1).
Line up the holes and attach the leg using six Allen Recess Screws (A). Tighten the screws
using Allen Wrench (B). Repeat this Step to attach the other three Leg assemblies as
shown in illustration #2.
Economy Shapes Desk11-16-15
P1
A
B