User`s guide

10
DISSASSEMBLY
To dismantle the scooter just reverse the steps for assembly.
*You must power o your scooter before dissassembly.
(1) Turn o the power and take out the power key from switch lock.
(2) Loosen and remove the seat from the seat post.
(3) Disconnect the main battery cable from the controller.
(4) Unplug all battery connections.
(5) Remove the batteries box from front chassis.
(6) Toggle latch release
-Press the latch button and then pull the toggle latch forward.(see
gure E)
- Li the toggle latch buckle up
(7) Frame separation.
- push back on the seat post to pivot the scooter’s rear section rearwards
until the rear sections Is standing vertically on its rear bumper.
- li the front section up until the lower pegs are no longer in the
curved locking brackets. See gure B.
(8) Place down the tiller to horizontal position.
g A g B
g D
g E
g C