Owner manual

5. After drying, reassemble the filters as shown below:

◆ Ensure the appliance is disconnected from the charger before removing

the filter. Be careful not to pull the ‘ON’ trigger.

◆ Check and wash the filter regularly according to instructions to maintain

performance.

◆ The filter may require more frequent washing if vacuuming fine dust or if

used mainly in ‘ High Powerful suction’ mode.

◆ Wash the filter with cold water only.

◆ Run water over the outside of the filter until the water runs clear.

6. Put the filter case back into the dust cup.

7. Attach the dust cup by twisting in a counterclockwise direction.