User Manual TC1 Series TC1 Mate/TC1 Pro Cordless Vacuum... Brandsus@outlook.com Mon. - Fri. 9am - 6pm (CST) Contact us We are here to help! Brandsus@outlook.
1 IMPORTANT SAFETY INSTRUCTIONS 2 WHAT'S IN THE BOX 3 OVERVIEW 4 ASSEMBLY TABLE OF CONTENTS 5 SPECIFICATION 6 OPERATING INSTRUCTIONS 7 CLEANING AND MAINTENANCE 8 CLEANING A CLOG 9 TROUBLESHOOTING 10 WARRANTY 1 3 4 5 6 7 14 19 20 21
1 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using an basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, DAMAGE, OR INJURY: 1. To protect against electrical shock, do not immerse the power cord or plug in water or any other liquid. Please always operate it with dry hands to avoid the risk of electrical shock or serious personal injury. 2.
2 WHAT'S IN THE BOX 3 OVERVIEW CAUTION: Assemble the vacuum according to the "Assembly" section.
4 ASSEMBLY 5 SPECIFICATIONS Name Vacuum Cleaner Model TC1 Series Adapter Input Voltage Adapter Output Voltage 100V~240V 50/60Hz 31V 0.5A Disposal： The chemical substances contained in the built-in lithium-ion battery of this product will pollute the environment. Before scrapping the product, the battery must be removed and handed over to a professional waste battery recycling station for disposal. Do not dispose of old electrical appliances with household waste discard.
OPERATING INSTRUCTIONS Charging Instruction (3) Connect the adapter jack to the charging port of the battery pack. CAUTION: It is important to fully charge your machine before using it for the first time and after every use. 1 Charging Wall Mount To charge the machine, place it directly on the charging wall mount after every use. 2 Conecting the Adapter with Wall Mount Plug the adapter into a wall outlet and connect to the wall mount charging port.
6 OPERATING INSTRUCTIONS Crevice Tool Instruction Indicator Light Instruction With brush: Press the button to move the brush back to the fixed position to clean the dust. Without brush: Push the brush forward to the fixed position to clean the particles from the crevices Low Battery Alarm (After turned on, the white light steadily (no flashing). And flashing red quickly when the battery is below 10%.
6 OPERATING INSTRUCTIONS Accessories Usage Guide 1 Floor Brush: suitable for carpets, floors, and other flat, horizontal surfaces. 2 Sofa Brush: suitable for surface dust, pet hair, mites, etc., on soft surfaces, such as sofas or mattresses. 4 Pet Grooming Brush: suitable for removing floating hair from pets. Charging Wall Mount Instruction 1 3 11 Using screws to connect the two sides to the main board.
6 OPERATING INSTRUCTIONS 2 7 CLEANING AND MAINTENANCE Plug the adapter into the wall socket and connect it to the charging port on the charging base. CAUTION: Always switch the vacuum OFF before attempting to empty the dust cup. Clean the Dust Cup 3 4 13 1 Empty the dust cup when the dust inside has exceeded the MAX line. Otherwise, the suction may be weakened. 2 Remove the telescopic tube from the main body before maintaining and cleaning the dust cup.
7 CLEANING AND MAINTENANCE CAUTION: If you find that the suction is weak or the “Suction Blockage Indicator" flashes, then please wash the filter. on the LED screen 4 Air dry at least 24 hours before reinstalling. Cleaning the Filter Device 1 Press the dust cup release button and remove the dust cup. 5 Assemble the pre filter, filter sponge back. Do not assemble them until completely dry. Wet 2 After taking out the dust cup, take out the pre-filter and filter sponge.
7 CLEANING AND MAINTENANCE Clean the Sofa Brush CAUTION: When the "Brushroll Jam Indicator" " " on the LED screen flashes until the screen is off, while the LED light on the floor brush is off and the floor brush stops rotating, it means that the floor brush is blocked. Check the floor brush and clear the blockage. 1 Press and turn the buckle counterclockwise to the " " sign. 2 Pull out the buckle, and then take out the brushroll. 3 Wash the brushroll under running water.
8 CLEANING A CLOG 9 TROUBLESHOOTING Troubleshooting CAUTION: Low suction or vacuum failure caused by overheating may be due to a clog in the vacuum. Please check and clear clogs in the dust cup, mesh shell, pre-motor filter, post-motor filter, metal tube, and floor brush. PROBLEM The vacuum cannot be charged Cleaning a Clog 1 Check and empty the dust cup. 2 Check and rinse the filter and sponge. Do not assemble them until completely dry.
10 WARRANTY CUSTOMER CARE WARRANTY SERVICE The 1-year Limited Warranty is valid for Products. 1. If you have a query about your Maircle appliance, please contact customer service at: Brandsus@outlook.com If your machine is used correctly according to the instruction manual and there is a quality failure during the warranty period, we will provide you with free warranty service once you contact us.
