Instructions / Assembly

Assembly

Video

PART LIST DESCRIPTON QTY

1A1

LEFT ARM

RIGHT ARM

BACK

SEAT

BASE

SPRING WASHER

-- M6

WASHER

-- M6

NUT

-- M6

BOLT

-- M6 X 15mm

BOLT

-- M6 X 35mm

HEX WRENCH

WRENCH

PLASTIC CAP 1

PLASTIC CAP 2

U-SHAPE FITTING

For any missing or damaging parts, hardware, or any

PAGE 1
PART LIST Assembly Video DESCRIPTON QTY A1 LEFT ARM 1 A2 RIGHT ARM 1 B BACK 1 C SEAT 1 D U-SHAPE FITTING 1 E BASE 1 F SPRING WASHER -- M6 4 G WASHER -- M6 18 H NUT -- M6 8 I BOLT -- M6 X 15mm 4 J BOLT -- M6 X 35mm 14 K HEX WRENCH 1 L WRENCH 1 SERVICE@RILYSON.
PAGE 2
Step 2: Place seat panel (C) between arms and back panel, attach it to arms (A1 and A2) with 4pcs bolts (J) and 4pcs washers (G), and then attach it to back panel with 2pcs bolts (J) and 2pcs washers (G). * Due to design and handicraft limitation, it may has around 1/2 in. gap between arms and back panel after assembly. This is normal and will not affect outlooking and daily usage.
PAGE 3
DESCRIPTON QTY A LEG 4 B TABLE TOP 1 C TRAY 1 D WASHER -- M6 12 E BOLT -- M6 x 12mm 12 F HEX WRENCH 1 PART LIST Assembly Video For any missing or damaging parts, hardware, or any other problems, WELCOME to email us at: SERVICE@RILYSON.
PAGE 4
PRE-ASSEMBLY PREPARATION: --- Please read through the instructions before beginning assembly. --- Clear out the space for assembly and lay out all of the parts based on the Parts List, extra room will allow you to easily determine if all the pieces are present. --- Keep small parts and pieces away from children until fully assembled. Step 1: Attach 4pcs legs (A) to table top (B) with 8pcs bolts (E) and 8pcs washers (D).