Operating Instructions

Mopeka Products LLC www.mopeka.com
Page 4 M2000012E
General Instructions & Warnings
Only install this device as described below. No field assembly is required. The sync process to the app on your
smart device, as described below, should occur in an area clearly out of any explosive atmosphere.
Once device is synced to the smart device/app, the device is “in service” and operating normally. Device will
then operate continually until battery is exhausted. There is no “Power Off” mode from that point forward.
Once in service, the device may then be moved, repositioned, or removed from the tank as needed, without
any special instruction or changes to the device.
This equipment is not intended for repair or maintenance, other than changing batteries.
Any modification of the device may result in an unsafe condition.
Do not use device for any other application, other environment, or in any other manner than as stated in this
manual. Any such misuse may result in an unsafe condition.