Operating Instructions

Mopeka Products LLC www.mopeka.com
Page 5 M2000012E
Mopeka Pro + Instructions (APP USER/HOMEOWNER)
Startup:
1. Remove 2 screws and lid.
2. Install 2 AAA batteries. Two AAA Energizer Ultimate Lithium batteries are required. Note: Battery
orientation is shown in the bottom of the sensor under each battery.
Cellular:
3. Sensor will beep 2x when batteries are inserted. Wait for 3 beeps, to indicate successful
cellular/cloud connection. First start up may take longer to achieve 3 beeps because of initial
cellular provisioning.
4. Note: Any time button is pressed, data will also be uploaded to the cloud. So, for example, after
pressing the button to sync the sensor to the app, you will hear 3 beeps after data is uploaded to
the cloud.
BLE & Cellular:
5. Reinstall lid and screws. Torque = 9 in lbs.
6. Open Mopeka app.
7. Press button for 2 seconds to sync sensor to app.
8. In the app, go to sensor page; click on settings icon; and enter appropriate tank size. Other
settings may be adjusted as desired.
9. Be sure to create a user login (person icon in upper left corner of main app screen) to enable all
features of the app such as remote checking tank level.
Installation:
10. Prior to installation, install sonic grease on center pad as shown.
11. Push and hold sync button (3 seconds) until beeping starts.
12. The beeping is an indicator of the correct installation position and ultrasonic function.
13. Note: LED light will flash simultaneously with beeper, as visual indicator if background noise
makes hearing beeper difficult.
14. Beeping will be rapid when button is first pressed.
15. Install sensor on tank bottom. See installation tips below.