Operating Instructions

Mopeka Products LLC www.mopeka.com
Page 8 M2000012E
14. Install sensor on tank bottom. See installation tips below.
15. As sensor begins to read tank level, beeping will slow indicating good quality readings.
16. Wait for 10-20 seconds to evaluate beeping (and thus installation position.)
17. If beeping stops, reading quality is adequate and installation is complete.
18. If beeping has not stopped, reposition sensor and reevaluate beeping.
19. The Mopeka Tank Check app may be used to evaluate tank level and reading quality in further
detail, including a bubble leveling tool that can help ensure proper, horizontal position of sensor.
20. After successful install, check cloud page again and verify sensor is now updating in the cloud
system. Note: You may press the button on sensor anytime, to initiate a cloud update.
21. Sensors normally update every 6 hours otherwise.
To Setup Bluetooth access to Mopeka app (for homeowners/users that want to also directly read
sensor in app):
22. Open Mopeka app.
23. Press button for 2 seconds to sync sensor to app.
24. In the app, go to sensor page; click on settings icon; and enter appropriate tank size. Other
settings may be adjusted as desired.
25. Be sure to create a user login (person icon in upper left corner of main app screen) to enable all
features of the app.