Operating Instructions

Mopeka Products LLC www.mopeka.com
Page 9 M2000012E
Installation Tips:
Residential Sensor, apply grease to pad shown. Note also that if sensor is repositioned several times, it
may be necessary to reapply grease, to ensure good coverage of the round pad.
Bulk Storage Tank Sensor, apply grease to circular area shown.
For vertical tanks, the sensor should be installed in the center, bottom of tank as shown.
Place blocks, if needed, under tank to allow adequate clearance for sensor. Sensor should not contact the
ground.
Tank should be as level as possible to ensure proper ultrasonic performance.