Hogtalare Wireless Stereo Speaker 3 TABLE OF CONTENT IMPORTANT SAFETY INSTRUCTIONS 2-6 BOX CONTENTS 7 DEVICE LAYOUT 8 FIRST POWER UP (TURNING DEVICE ON \ OFF) 9 AUTOMATIC \ MANUAL POWER OPTIONS 10 CHOOSING YOUR SOURCE. 11 CONNECTING VIA BT (PAIRING). 12 TWS PAIRING 13 AUX 3.5MM STEREO INPUT. 14 ADJUSTING SOUND LEVEL. 14 USING A WIFI DONGLE. 15 REMOVING\ ATTACHING THE GRILL 16 TECHNICAL INFORMATION 17 FUNCTIONS AND OPERATIONS 18 TROUBLESHOOTING 19-21
Hogtalare Wireless Stereo Speaker IMPORTANT SAFETY INSTRUCTIONS Read the safety and operation instructions before using the product. Follow all the instructions and heed all warnings. Keep the instructions handy for your future reference. OWARNING! • WARNING - To reduce the risk of fire or electric shock, do not expose the device to water. • WARNING - do not cover the device.
Hogtalare Wireless Stereo Speaker 5 INSTALLATION • Keep the device away from direct heat (radiators, stoves, kettles, ovens, etc ... ) • Keep the device away from fire and flames (Candle, fireplace, bonfire, etc ... ) • Do not cover the front speaker grills. • Place speaker on flat and stable surface • Plug in the supplied AC power cable to the speaker. • Plug in the supplied AC power cable to the wall outlet. • For installation inside a compatible cabinet (such as IKEA KALLAX \ EXPEDIT etc): • Please tak
Hogtalare Wireless Stereo Speaker 6 CLEANING AND MAINTENANCE • Keep the device away from dust, clean regularly with dry cloth and vacuum cleaner. • All servicing should be done by qualified service personnel. Servicing is required if the device: has been damaged in any way, submerged or soaked in water, does not operate normally, or has been dropped.
Hogtalare Wireless Stereo Speaker 7 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Hogtalare Wireless Stereo Speaker A 8 CAUTK>N AVIS • AnENTIOI: IIIIQUE DE CNOC aECTIIIQUE-NE PAI oun• CAUTION • Risk of electric shock! Do not open or disassemble the device. There are no user seNiceable parts inside. Refer seNicing to qualified seNice personnel. • The equipment should be installed and operated with minimum distance 20cm between the radiator & your body. • This equipment is a Class II or double insulated electrical appliance. • The max. operation temperature is 45 °c.
9 Hogtalare Wireless Stereo Speaker BOX CONTENTS 1. Power cord and region specific plugs. 2. Quick start user manual and safety information. 3. Hogtalare active stereo loudspeaker (and grill).
10 Hogtalare Wireless Stereo Speaker DEVICE LAYOUT FRONT BACK 1. Input selection button / indicator 1. Usb port (5v output DC only) 2. Bt tws pairing button / input indicator 2. Aux input for 3.5Mm stereo plug 3. Power button / / indicator 3. Ac power input 4. Sound level up button 4. Standby \ auto on selector 5. Sound level down button 5. Wall mount connections 6. Left \ right tweeters 7. Bass reflex port 8. Woofer 8 6 5 0 a ~ -@ 0 .
Hogtalare Wireless Stereo Speaker FIRST POWER UP 1. Press the power button to turn on the speaker. 2. When the speaker is turned on, all lights will turn on (excluding the bt \ tws pairing indicator). I 2 00©®0 TURNING THE DEVICE TO STANDBY: 1. Pess the power button to turn the device to standby. 2. Power led indicator will switch off. 3.
12 Hogtalare Wireless Stereo Speaker AUTOMATIC\ MANUAL POWER OPTIONS Hogtalare wireless stereo speaker has a switch on the back that toggles between 2 power conditions: 1. Manual - the speaker will turn on or off only by the user. 2. Auto-on - the speaker will turn on once music is being streamed to it or off after 5 minutes of inactivity.
13 Hogtalare Wireless Stereo Speaker CHOOSING YOUR SOURCE Hogtalare wireless stereo speaker has 2 audio source inputs - a bt input and an aux 3.5Mm stereo input. To select your input source: 1. One short press on the input selection button / indicator will switch between inputs. 2. If the bt tws pairing button / input indicator is on (or flashing) - bt source is selected. 3. If the bt tws pairing button / input indicator is off - aux 3.5mm stereo input is selected.
Hogtalare Wireless Stereo Speaker CONNECTING VIA BT (PAIRING) 1. Short-press the source button to switch device to BT mode. 2. Bt pairing button indicator will turn on (if a device is already paired) or flash (if no device is paired). 3. Press bt tws pairing button / input indicator. 4. Bt tws pairing button / input indicator will start blinking (fast short blinks). 5. Pair BT device (choose "hogtalare" from the available BT devices list on your BT compatible audio source). 6.
Hogtalare Wireless Stereo Speaker 15 Hogtalare Wireless Stereo Speaker Will Remember up to 5 BT Devices and will try to connect to them automatically when they are in range, and prioritize the last connected device. If the BT source and the Hogtalare wireless stereo speaker get out of range and disconnect, Hogtalare wireless stereo speaker will attempt to auto-connect as soon As the BT device Moves Within Range Again.
16 Hogtalare Wireless Stereo Speaker BOTH: 1 BOTH: 2 [000®0] [000®~] T BOTH: 3 [000®0] MASTER: 4 Pair BT source if needed MASTER: 5 [000~®] I MASTER: 6 SLAVE: 7 BOTH:8 000®0 [000®0] Master: Left channel Slave: Right channel
17 Hogtalare Wireless Stereo Speaker AUX 3.5MM STEREO INPUT 1. Connect 3.5Mm stereo plug to the device. 2. Short-press input selection button to switch to aux mode. 3. Bt tws pairing button/ input indicator will turn off (indicating aux input) .
Hogtalare Wireless Stereo Speaker 18 ADJUSTING SOUND LEVEL 1. Press \ hold the sound level up button to increase sound level 2. Press \ hold the sound level down button to decrease sound level 0 WARNING: always make sure to adjust the volume to a safe listening level depending on your environment and distance from the speaker.
19 Hogtalare Wireless Stereo Speaker USING A WIFI DONGLE HOGTALARE wireless stereo speaker features a 5v USB DC power outlet on the back panel. This is not a digital audio input, it can only be used for charging or powering other devices. To connect a wifi dongle that requires a 5v power supply: 1. Connect the dongle stereo output to the aux 3.5Mm stereo input. 2. Connect the usb power source cable to the 5v usb de power outlet. 3. Set hogtalare to aux input by short-pressing the input selection button.
Hogtalare Wireless Stereo Speaker 20 REMOVING\ ATTACHING THE GRILL HOGTALARE wireless stereo speaker comes with a removable grill that attaches to place with hidden magnets. 1. The remove the grill, gently pull the leather logo tag found on the bottom left side. 2. To place the grill back on, just push the grill into place and the magnets will automatically lock it in place. 1 -- 2 ATTENTION! The grill frame has waveguides that need to be positioned above the tweeters.
Hogtalare Wireless Stereo Speaker TECHNICAL INFORMATION All specifications are subject to change without prior notice. Driver And Build • 1 X 6" Double magnet woofer • 2 X 1" Soft dome tweeters (LR Stereo) • 3 X Custom-made amplifiers: 1X 25W - Woofer 2X15W - Tweeters • 50W Per channel • Frequency response: 3600-20,000 Hz • Reinforced cabinet with wood frame • Vinyl finish • Single unit stereo • 330X330X150 Connectivity • BT 4.2 with APT-X support • WiFi ready • AUX Input (3.
22 Hogtalare Wireless Stereo Speaker FUNCTIONS AND OPERATIONS FUNCTION OPERATION INDICATOR TURN DEVICE ON S for the Power button - short press when device is off Only power indicator light on TURN DEVICE OFF Power button - short press when device is on All lights on BT INPUT ACTIVE INPUT SELECTION BUTTON short press BT TWS PAIRING BUTTON / INPUT INDICATOR on BT PAIRING MODE BTTWS PAIRING BUTTON short press when device is in BT mode.
23 Hogtalare Wireless Stereo Speaker TROUBLESHOOTING l PROBLEM CAUSE THE DEVICE DOES NOT TURN ON. S for the Power button - short press when device is off Only power indicator light on The device is set on the wrong input source Press the source button to switch to the correct audio source No audio source connected Connect the sound source to the speaker either via BT or with a 3.
Hogtalare Wireless Stereo Speaker 24 TROUBLESHOOTING ~ PROBLEM ERRATIC PERFORMANCE CANNOT CONNECT OR PAIR WITH A BT DEVICE CAUSE ACTION Interference from another electronic device Move the speaker to another location.
25 Hogtalare Wireless Stereo Speaker TROUBLESHOOTING PROBLEM BT CONNECTION DROPS OUT CAUSE ACTION The two BT devices are too far apart or the connection is affected due to obstacles Move the devices closer so that they are within10 meters, and unobstructed by obstacles such as walls or doors There is a strong electric field Interfering with the devices Items such as microwave ovens, wireless network adapters, fluorescent lights and gas cookers use the same frequency range as the BT device.
Hogtalare Wireless Stereo Speaker 26 NOTES A BT device could cause sound-related or technical faults, depending on use, in the following cases: • When some part of the body is in contact with the receiving/transmitting system for the BT device or the stockwell. • Electrical variations due to obstacles in the form of walls, corners, etc. • Exposure to electrical disruptions from devices within the same frequency band, for example medical equipment, microwave ovens and wireless networks.
www.morelhifi.