User Manual

FEATURES
SEND LEVEL: This knob controls the overall level being sent to the effect(s) PHASE SWITCH: This allows you to invert phase of the FXB Return Input if you should experience inverted phase on a pedal. Not sure what that is? Try switching the Phase Switch in either direction and see which sounds better to YOUR ear. There is no harm in using the switch in either direction but you will hear a difference. To access switch; open battery door, remove battery and pull down foam to expose switch. See below:
ELECTRO-OPTICAL: The amount of light from the LED (Light Emitting Diode) that shines on the LDR (Light Dependent Resistor) is controlled by a shutter placed between the two devices. Our unique electro- optical design ensures smooth overall control of the FX Blender without unwanted noise typical with potentiometer (pot) controlled pedals. POWER ON/OFF LED INDICATOR: A red LED located above the SEND LEVEL
knob serves as a Power On/Off indicator. When the LED is on, power is on. When the LED is off, power is off.
A Division of Sound Enhancement Products,
Inc
325 Cary Point Drive, Cary, IL 60013
Phone: [phone]
Fax: [phone]
www.sepigroup.com
FX
Blender
Model FXB