Warranty

ManualsBrandsMorning Industry ManualsKitchenSingle Cylinder Antique Brass Electronic Touch Pad Deadbolt

LOCK PROGRAMING SHEET

QKF Lock Sets

1-800-355-0157

1. Open the battery cover.

2. Press the Set Button (S) and listen for 1 beep.

3. Enter desired code on keypad (2- 8 digits within 5 seconds),

then press the unlock button on the keypad.

4. Engage lock by pressing the lock button on the keypad.

5. Test the lock by entering code then pressing the unlock

button.

6. Repeat procedure 2 & 3 to enter up to 6 new user codes.

Set A Code

Delete Programed Remotes

1. Press the Cancel Button (C) and listen for 1 beep.

2. Press and hold either the lock or unlock button on

the new remote control until you hear 2

confirmation beeps.

(This will erase all previously programmed remote

controls leaving the new remote control as the first and

only remote control programed).

Warranty

Morning Industry thanks you for your business and invites you to check out the new and exciting products

on our web site: http://www.morningindustry.com.

Lock function will NOT operate without

any pre-programed code(s).

Lifetime Warranty on Exterior Finish • 25 Years Mechanical Warranty • 1 Year Limited Electrical Warranty

Morning Industry Inc. warrants to the original residential user of this product that it will be free from defects in materials

and workmanship, under normal use, for 1 year from the date of purchase. User must provide a copy of original purchase

receipt. This warranty Does Not Cover abuse or misused products or products used in commercial applications. All

mechanical components carry a limited warranty, for a period of 25 years from the date of purchase. The Finish of the

exterior of this lock carries a limited warranty of the lifetime of the unit against deterioration due to normal weather

conditions. This warranty does not apply to locks that have been improperly installed, modified, put to a use other than

designed, or subjected to acts of God (such as floods, lightning, earthquakes, etc.)

This warranty is limited to repairing or replacing of this lock only at Morning Industry Inc.’s sole discretion. Morning

Industry Inc. will NOT be liable for the cost of installing, removing, nor reinstalling this product, nor direct, indirect, or

consequential damages to persons or property resulting from the use of this product. To Implement this warranty, please

enclose a copy of purchase receipt, day and night time telephone number, and a check or money order of $10.00 for

Shipping & Handling.

Please return the lock with the above information with S+H Charge freight prepaid to:

Morning Industry Inc. Attn: Returns Dept. 270 S. 5th Ave. La Puente, CA 91746

Set A Remote

1. Press the Set Button (S) and listen for 1 beep,

then press and hold either the lock or unlock button

on the remote control until you hear 2 confirmation

beeps.

2. Repeat above procedure to program up to

15 different remote controls.

1. TO LOCK: Press Lock Button on the keypad

2. TO UNLOCK: Enter code then press Unlock Button

on the keypad.

3. REMOTE: Works up to 30ft away.

(without obstructions). Range decreases with

obstructions.

Delete Programed Code(s)

1. Press the Cancel Button (C) and listen for 1 beep.

2. To delete a single code, enter the desired code to be

deleted, then press the Unlock Button on the keypad

until you hear 2 confirmation beeps.

3. To delete all codes, press and hold the Cancel Button (C)

until you hear 2 confirmation beeps.

4. To add new code or codes, see “Set A Code”.

Set Button

Cancel Button

Program Button