Installation Manual

5TriStar Meter 2 Operator’s ManualImportant Safety Instructions
Installation Safety Precautions (Local Meters)
• Disconnect all power sources from the controller before mounting
TS-M-2 or TS-M-2-600V local meters.
• Use the supplied RJ-11 meter cable to connect the meter to the
controller.
• Bend the power conductors in the conduit wiring box so that they
do not touch the back of the meter.
• Apply silicon gel to the RJ-11 connections on the meter and the
controller for maximum protection from corrosion.
Installation Safety Precautions (Remote Meter)
• Disconnect all power sources from the controller before opening
the conduit box to connect the meter.
• Mount the TriStar Remote Meter 2 indoors. Prevent exposure to
the elements and do not allow water to enter the meter.
• Protect the RJ-11 wiring with grommets, conduit, and wire clips as
necessary.
• Apply silicon gel to the RJ-11 connections on the meter and the
controller for maximum protection from corrosion.
About this Manual:
This manual provides detailed installation and usage instruc-
tionsfortheTriStarMeter2digitalmeters.Onlyqualied
electricians and technicians who are familiar with solar system
design and wiring practices should install the TriStar Meter 2.
The usage information in this manual is intended for the
system owner/operator.