SunLight Specifications

SOLAR LIGHTING CONTROLLER

Morningstar’s advanced SunLight solar lighting

controller combines the SunSaver design with

a microcontroller for automatic lighting control

functions.

This technology provides:

• Proven Reliability

• Precise Lighting Control

• PWM Battery Charging

Operation:

• Rotary digital switch to select among

10 lighting options (see back)

• Test button flashes red LED to confirm

correct rotary switch selection

• Test button turns lights on for 5 minutes

(in LVD limited to 3 times)

• LVD overrides lighting timer

• Sunrise overrides lighting timer

• Timer accuracy is within 2 seconds

Four Versions Available:

• 12 Volt: 10 and 20 amp ratings

• 24 Volt: 10 and 20 amp ratings

Features:

• Microcontroller digital accuracy

• Fully automatic operation

• Ten field adjustable lighting control options

• Special on/off/on functions

• Manual test capability

• LVD override protection

• Detects day and night using the PV array

• Suitable for all 12/24 Vdc lamps

• Sealed/Flooded battery select

• Temperature compensation

• Parallel with a SunSaver for 40 amps solar

• Includes SunSaver battery charging circuit

PAGE 1
SOLAR LIGHTING CONTROLLER Morningstar’s advanced SunLight solar lighting controller combines the SunSaver design with a microcontroller for automatic lighting control functions.
PAGE 2
TEC H NICA L SPECI F ICATIONS Lighting Control Options SUNSET NIGHT SUNRISE • OFF • 2 HOURS ON • 4 HOURS ON • 6 HOURS ON • 8 HOURS ON • 10 HOURS ON • 3 / OFF / 1 • 4 / OFF / 2 • 6 / OFF / 2 • DUSK-to-DAWN Mechanical Specifications 6.60 (168) 6.10 (155) LOW VOLTAGE DISCONNECT CHARGING LIGHTING CONTROL SOLAR LIGHTING CONTROLLER D/D 6/2 TEMP. SENSE 1.00 (25) 12 Volts 10A Solar 10A Light SOLAR 4 + BATTERY – 3 2 + 12 V – LOAD 1 6 + – 5 Wire size #10 AWG (5.