Diagram: Inverter Wiring

page 2 of 2ALL.DIG.Correct_Inverter_Wiring.01.EN
© 2013 Morningstar Corporation. All rights reserved.
page 2 of 2
IMPORTANT: This is not intended to be a complete system diagram; fusing, discon-
nects, and grounding should comply with local electric codes.
Notes:
Inverters installed in battery-based PV systems should ALWAYS be wired directly to the battery bank or +/- •
system bus.
NEVER wire an inverter to the Load terminal output of any Morningstar controller (doing so can damage •
the controller’s Load circuitry).
The Charge Controller shown above can be ANY Morningstar charge controller.•
The SureSine inverter shown above can be ANY model inverter (Morningstar or otherwise).•
For detailed installation information, please consult the respective product manuals.•
+
-
GND
FUSE
Charge Controller
Solar
+ -
Batt
+ -
Load
+ -
SureSine Inverter
AC Out
FUSE
+ -
PV Array
GND
FUSE
WHITE
BLACK
Battery +
Battery -
Array +
Array -
Batt
+
-
GND