Generation 3 Features Overview

Morningstar SunSaver (Gen 3) Upgrade Overview August 3, 2012
Legacy Design Previous Generation SunSaver (Gen 2)
Same Size Controller
Same Amp and Voltage Ratings
Same Mounting Plates
Same Easy Battery Selection
Same Rugged Terminals
Same Hazardous Location Rating
Same Competitive Price!
New Features New Generation SunSaver (Gen 3)
Full Electronic Protections
4 Stage Battery Charging
Self-Diagnostic to detect critical Faults
Multi-Color Status LED
3 LED Battery Charge Level
Dead Battery Recovery
Telecom mode for sensitive loads
15V max charge limit for sensitive loads
New UL 1741 and CSA C22.2 No. 107.1-01 certification
Full Electronic Protections
Solar/ Load Overload
Solar/ Load Short Circuit
PV/ Battery/ Load Reverse Polarity
Damaged Battery Temperature Sensor
High Temperature & High Voltage Disconnect
4 Stage Battery Charging
The New SunSaver Gen 3 Charge Controller offers two additional charging stages for optimal battery charging.
Bulk
Absorption
Equalization (flooded)
Float Stage
The automatic float stage is beneficial for systems that transmit
occasionally as it keeps batteries topped off for extended periods of time without risk of overcharging.
Self-Diagnostic to detect critical faults
The SS Generation 3 includes a multi-color status
LED as well as 3 Battery LED’s. Together these
can indicate up to 13 possible error conditions.
When the controller is functioning properly it is
clearly indicated by the status LED as green.
All faults are electronic and reset
automatically when resolved.
(the SunSaver does not require any
internal fuses)

Summary of content (2 pages)