TriStar MPPT IEC Testing Report

3933 US Rt 11
Cortland, NY 13045
Telephone: (607) 753-6511
Facsimile: (607) 753-1045
www.intertek-etlsemko.com
Page 1 of 1
This report is for the exclusive use of Intertek’s Client and is provided pursuant to the agreement between Intertek and its Client. Intertek’s responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use
of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only the sample tested. This
report by itself does not imply that the material, product or service is or has ever been under an Intertek certification program.
Intertek Testing Services NA, Inc. SD 12.1.2 (11/11/10) Informative
May 25, 2011 Letter Report No. 100332228CRT-001a
Project No. G100332228
Mr. Qing Kou Ph: (215) 321-4457
Morningstar Corporation
8 Pheasant Run email: lgordon@morningstarcorp.com
Newton, PA 18940
Subject: Test Report of the Solar Charge Controllers - TriStar MPPT Family
Dear Mr. Qing Kou,
This letter represents the test results of the above referenced equipment to the requirements contained in the
following standards:
IEC 62093 Balance of System Components for Photovoltaic Systems – Design Qualification Natural
Environments, First Edition, 2005-03
The following tests were performed on the solar charge controller TS-MPPT-60 as representative of TriStar MPPT
product family covered by ETL listing report 3185898CRT-001a.
Test IEC 62093 Results
Protection Against Mechanical Impact (IK Code) 11.6 Pass
Vibration Test 11.8 Pass
Shock Test 11.9 Pass
Damp Heat Test 11.13 Pass
Robustness of Terminals Test 11.14 Pass
Damp Heat Cyclic Test 11.15 Pass
If there are any questions regarding the results contained in this report, or any of the other services offered by
Intertek, please do not hesitate to contact the undersigned.
Please note, this Letter Report does not represent authorization for the use of any Intertek certification marks.
Completed by: Zhiyong Hu Reviewed by: Thomas R. Brown
Title: Senior Project Engineer Title: Engineering Team Leader
Signature:
Signature
Date : May 26, 2011 May 26, 2011

Summary of content (1 pages)