Installation & Assembly

Moroccan'Mosaic'&'Tile'House'
2804'S.'Highland'Dr.'Las'Vegas,'NV'89109'
(702)'749-8123'
[e-mail]'
Page%3/3%
Moroccan Cement Tile
Installation Instructions
D) Sealing
MMTH Uses:
Moroccan Mosaic & Tile House In House Sealant
1. Make sure the sealer is well mixed before applying to the tiles.
2. Apply the sealer with a wool roller or sponge without excess. Apply a few
layers until it saturates the tile.
3. Allow each coat of sealer to dry before reapplying another coat.
4. Fourth and Last Coat – Apply one coat of the Topical Sealant.
5. If tiles are installed before construction is finished, make sure you protect
them appropriately by covering them with a large piece of fabric or tarp.
Most contractors in the USA have little to no experience with cement tiles.
It is important that your tile setter follows our detailed installation
instructions and contacts us should they have any questions.
Ongoing Maintenance
Cement tiles should be cleaned on a daily basis with water and a PH neutral
soap or detergent.
DO NOT USE bleach or any chemical cleaners on cement tile.
Simply wet your tile and apply the soap/detergent with a sponge, Swiffer®, or
similar cleaning tool. Rinse with water.
Stain Removal
Many stains can be removed with Hydrogen Peroxide. Saturate a clean cloth or
white paper towel and let it sit on top of the stain. Hydrogen Peroxide will not
harm the tile.
Deeper and difficult stains can be removed using a poultice method.
Place a poultice powder on top of a stain (indirectly, using a paper towel to place
the powder on). The poultice will then draw out the stain by absorbing it.
Miracle Seal has a great stain removal guide using their products.
You may find more information on MiracleSeal.com