manual

5
Dry ironing
Your iron can be used for dry ironing. Set the
variable steam switch (1) to ‘O’ and set the
temperature dial (9) as desired (see page 3).
You won’t need water in the tank unless using
the water spray or steam boost features .
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, etc. Hold the iron
between 1cm and 2cm away from the item and
press the steam boost button
(3).
Anti-drip system (certain models only)
This prevents water escaping from the soleplate
(8) when the iron is too cold.
During use, the anti-drip system may emit a loud
click, particularly during heat-up or whilst cooling
down. This is perfectly normal and indicates that
the system is functioning correctly
.
Anti-scale system
This system reduces scale deposits and helps
prolong the life of the iron .
Auto shut-off (certain models only)
The iron will automatically shut down if stationary
in the horizontal position for 1 minute, or in the
vertical position for 8 minutes.
When auto shut-off is activated, the indicator
light
(4) will flash.
Gently move the iron and it will reheat. Wait for
the iron to heat-up and continue ironing
.
Features of your iron
3
5
3
Steam boost
Press the steam boost button (3) for an extra
s
team burst for stubborn creases / heavy fabrics.
NOTE: If you need to use the steam boost whilst
d
ry ironing, check the temperature dial
(
9)
i
s set
w
ithin the steam range.
NOTE: For optimum steam quality, do not operate
t
he shot more than three times in succession
.
Using the iron for steam ironing (continued)
4
RN300250MUK Rev1.qxp_Instruction Booklet 10/07/2014 10:35 Page 5