Instructon Booklet

8
Dry ironing
To use your steam generator as a dry iron only,
follow steps 2, 3 and 4 of ‘Using the Steam
Generator for steam ironing’ on pages 6 & 7. You
do not need to put water in the tank or select a
steam level. Press
the steam trigger (3) at least
once every 10 minutes, or the product will
automatically turn off.
Auto shut-off
If the steam trigger (3) goes unused for 10
minutes, the product will automatically turn off
for safety and to save energy, and a beep will be
heard.
To restart, press the On/Off button (31) (see step
2 of ‘Using the Steam Generator for steam
ironing’ on page 6) and wait for the temperature
to rise again.
Steam function
During steaming, small amounts of water may be
ejected from the soleplate. This is normal and
can be avoided by using the steam for short
amou nts of time and only when the iron is at the
correct temperature (the temperature indicator
light (6) on the iron goes out when ready).
Sudden jolts of the boiler unit can also cause
water droplets on the soleplate; therefore, do not
move the base unit during ironing.
We recommend for first time ironing that you
iron over an old towel.
NOTE: The product may occasionally produce a
pumping sound during steam ironing. This is
normal and is caused by water being pumped
through the steam generator.
Vertical steam
Vertical steam is useful for removing creases
from hanging clothes, curtains, upholstery, etc.
Hold the iron between 1cm and 2cm away from
the item and double press the steam trigger (3)
for continuous steam.
WARNING: Do not use the vertical steam
feature on clothes that are being worn.
Features
3
3
Steam boost
T
he steam boost function is ideal for relaxing the
fibres of tougher fabrics (like jeans and linen) and
g
etting rid of those stubborn, hard to reach creases.
To activate the steam boost, simply press the steam
t
rigger
(
3)
t
wice in quick succession. To turn this off,
press the steam trigger again.
RN332017 MUK Rev1.qxp_IB 25/09/2018 12:31 Page 8