manual

4
5
Press the Head Release Lever and lower the
Head Unit pressing down until locked in
position. (You will hear an audible click and the
Lever will return).
44
Place the attachment and Splash Guard into
the Attachment Socket (8). Rotate the
Attachment Sleeve (7) clockwise to secure
into place.
22
Place the Mixing Bowl (3) into the recessed
Bowl Locator (6). Twist anti-clockwise to lock
into place.
1
Press the Head Release Lever (4) and lift the
Head Unit (1). The Head Unit will lock in the
upright position. You will hear an audible click.
Using your Stand Mixer
6
Add the ingredients to the Mixing Bowl. Do
not exceed the maximum quantity (1.5kg).
Before using your Stand Mixer for the first time,
clean the Bowl Cover
(2) Mixing Bowl (3) Splash
Guard (9) and attachments (10),(11),(12) in warm
soapy water. Dry thoroughly.
No parts are dishwasher safe.
Before first use
3
Place the Splash Guard (9) onto the required
attachment (10),(11),(12). The Splash Guard will
fix into the two notches on either side of the
screw thread.
400010 rev1_Layout 1 14/04/2014 12:21 Page 4