Operation Manual

4
6
When done, Turn the Control Knob to Off
BEFORE removing the Wand from the Milk.
5
Place the Steam Wand
(3)
10mm deep into a
jug of milk. Turn the Control Knob
(2)
to
Steam.
Using the Steam Wand
3
Plug the coffee maker into the mains.
2
Ensure the On/Off Switch (9) and Control Knob
(2) are set to Off. Select Steam (7).
11
Fill the Water Tank (5) and place into the coffee
maker.
4
WHEN FROTHING MILK ENSURE THE STEAM
CONTROL IS OFF BEFORE REMOVING THE
WAND FROM THE MILK.
WARNING
Slide the On/Off Switch (9) to on. The Power Indicator
Light (8) illuminates. The Temperature Indicator Light
(6) will turn off when the coffee maker is ready.
CM47150MUK rev3_Layout 1 02/09/2011 14:12 Page 4