Fryer User Manual

Basket operation
The handles are removable so they can
be attached to the 2 small or 1 large
basket.
Location of basket to drain
With the lid open and in the vertical
position, the basket can be raised into the
rest draining position or removed
completely.
When in the draining position the basket
should be hooked on the basket rest lip
(shown by the arrow). When lowering the
basket back, lift up to remove from the
basket rest position, push forward slightly
and lower down. Press the basket release
button and allow the handle to lower.
When using the large single basket both
basket release buttons must be pressed to
allow the basket to lower into the oil.
Assembly/Disassembly
sequence
The fryer has to be disassembled and
assembled following this procedure.
• Open the lid and remove.
• Remove the basket.
• Lift out the tank.
• Pull out the pod control.
Assembly is the reverse of the above
process.
Removal of the pod
1 Lift up the fryer body at the front as
shown and pull out the pod.
2 Replace by locating the pod in the
guides and push fully in.
3 Once the pod is in place route the mains
cable to the side or out of the back,
whichever is convenient.
Replacing the bowl
Ensure bowl contacts are dry before
replacing.
5
DF45075M Rev 1 20/12/04 11:15 AM Page 5