Ice Maker INSTRUCTION MANUAL Model: MRICE15SS Read these instructions carefully before using this appliance for the first time. STORE THESE INSTRUCTIONS CAREFULLY For product hints and tips plus more join us at www.morphyrichards.com.au facebook.com/MorphyRichardsAUS instagram.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, injury to persons or damage to property, follow basic precautions including the following: • WARNING: Misuse of appliance could cause personal injury as it contains flammable materials. • WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Children should be supervised to ensure that they do not play with this appliance. • In the absence of supervision, the cleaning and maintenance work should not be done by a child. • Do not leave the appliance unattended while in use. • Use of accessories not recommended or sold by the original manufacturer may cause risks of fire, electric shock or personal injury. • This appliance must be used in accordance with the instructions and must not be used for other purposes.
• Do not let the cord run across an open space e.g. between a low socket and table. • Do not let the cord run across a cooker or toaster or other hot area which might damage the cord. Other Safety Considerations • WARNING: To protect against fire, electric shock and personal injury, do not immerse cord, plugs, or appliance in water or other liquid. • WARNING: Extreme caution must be used when moving the appliance when containing hot food, water, or other hot liquids.
• Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is necessary to use an extension cord: 1) Use only extension cord with grounding plug. 2) The marked rating of an extension cord must be equal to or greater than the rating of this appliance. • WARNING: This appliance must be earthed. Plug the ice maker into an exclusive grounded power outlet. No other appliance should be plugged into the same outlet.
INTRODUCTION Thank you for purchasing a Morphy Richards Ice Maker. Produce bullet ice at a moment’s notice for a quick chilled drink or up to 15kg in a 24hr period. Please take some time to familiarise yourself with your new Ice Maker. This manual explains what you need to do before first use as well as explaining some hints and tips to keep your ice maker operating correctly.
PRODUCT OVERVIEW Lid Control Panel Viewing Window Front Cover Rear Housing Front Housing Plug Water Reservoir Evaporator Ice Basket Ice Tray Ice Exports Maximum Water Level Ice Basket Emitting Tube Receiving Tube Filter Ice Scoop Drain Tube Plug 7
CONTROL PANEL a b c f d g h e a Ice Size Selector - Large e Ice Size Selector b Ice Size Selector - Small f c Clean g Out Of Water d Start/Stop Button h Ice Basket Is Full Ice Making In Progress BEFORE FIRST USE Before first use, please take a few minutes to read this instruction book and find a place to keep it handy for future reference. Please pay particular attention to the safety instructions. 1.
USING YOUR ICE MAKER 1. Ensure the drain tube plug at the bottom of water reservoir is closed. 2. Plug the ice maker into the wall outlet. The Ice Making In Progress indicator (f) will blink. NOTE: The ice maker should not be turned on for 30 minutes, if it has been moved. 3. Open the lid (refer to the diagram on page 7) and remove the ice basket. 4. Do not fill above the MAX water level mark. 5. Replace the ice basket and close the lid. 6.
USING YOUR ICE MAKER 1. Allow the ice maker to warm up to room temperature. 2. It is recommended to replace the water weekly. Please empty the water reservoir, if the ice maker is not used for a long time. CLEANING AND MAINTENANCE To keep your ice tasting fresh and your ice maker looking in great condition, it is recommended to clean the ice maker at least once per week. 1. Stop the ice making cycle by pressing the Start/Stop button (d). Wait five minutes and unplug. 2.
CLEANING AND MAINTENANCE Work Bench/Table Fig. 1 Drain Tube Plug Drain Tube Plug Fig. 2 Fig.
TROUBLESHOOTING Problem Indicator light on. Possible Causes Low water level or lack of water. The water screen at the bottom of water reservoir is blocked. Solution Stop making ice. Refill water and press Start/Stop button to restart the ice making cycle. Follow cleaning steps on page 10. Pump malfunction. Call the Customer Care team for advice. Ice basket is full and the infrared light is blocked by the ice. Remove ice from ice basket. Emitting tube & receiving tube not working.
TROUBLESHOOTING Problem Possible Causes Solution The ice gets stuck together. The water temperature in the reservoir is too low. Fill the water reservoir with water ranging between 8°C and 25°C. The ice making cycle seems normal but no ice is produced. The ambient temperature or water temperature is too high. Start the ice making cycle in an environment with an ambient temperature less than 32°C and fill the water reservoir with some cold water.
MAINTENANCE If the unit fails to operate efficiently, is broken or other problems arise, unplug and do not operate. Ask for advice by calling your local after sales service agent or the Customer Care Centre on 1300 556 816 (AU) / 0800 666 2824 (NZ). WARNING! - It is hazardous for anyone other than an Authorised Service Person to service this appliance.
NOTES 15
Recycling: Do not dispose of electrical appliances as unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the ground water, polluting the food chain and damaging health and wellbeing. Glen Dimplex Australia Pty Ltd 8 Lakeview Drive Scoresby VIC 3179 Phone: 1300 556 816 Email: sales@glendimplex.com.au Web: www.
