Yard Vacuum User Manual

ManualsBrandsMorse Manufacturing ManualsYard VacuumMorse Kontrol-Karrier with AC Power Tilt 195A-3-460

Morse Kontrol-Karrier with AC Power Tilt

Serial Number 223495 to ______

Assembly Instructions

1. Install speed reducer oil vent plug and check oil level as shown in the speed reducer owners manual.

2. Consult an electrician to complete the wiring into the control box.

3. Prior to initial use, inspect all moving parts and test rotation of saddle assembly. Inspect rubber strap and cinch chain for proper

operation. Perform necessary load test, inspections, operator training, etc. as prescribed in the ANSI/ASME B30.20 standard.

Operating Instructions

1. With Kontrol-Karrier standing on the floor, lower hoist and engage hoist hook

into the lifting eye.

2. Raise hoist to lift Kontrol-Karrier clear of floor and move it to the drum.

3. Position Kontrol-Karrier at a height which aligns the saddle band with the center

of the drum.

4. With the rubber Fiber Drum Strap (item 25) hanging freely, push Kontrol-Karrier

against the drum to surround the drum with the saddle band.

5. Drape the rubber strap across the front of the drum and insert one chain link

into the slot on the ratchet (item 22). Turn the ratchet clockwise to tighten the

cinch chain around the drum.

6. Raise hoist and position the drum at the pouring station.

7. Pour the drum by pushing forward button on the control pendant (item 38).

8. After pouring is completed, rotate the drum back to vertical position and lower

hoist to return drum to floor.

9. To remove drum: Pull ratchet clockwise to relieve pressure on ratchet teeth. Lift pawl (item 18) to release teeth engagement and

rotate ratchet counter-clockwise to loosen chain and allow its removal from notch.

Maintenance

1. Inspect oil level in speed reducer.

2. Periodically inspect all moving parts, framework, rubber strap, and contact areas

for signs of wear, fatigue, or loosening. Perform all inspections, load tests, and

maintenance according to the ANSI/ASME B30.20 standard.

3. Ensure all labels are in place. Product labels should be inspected periodically and

cleaned as necessary to maintain good legibility. Please contact Morse Mfg. Co.

for replacement labels.

Options and Accessories to enable handling different sizes and types of drums with models 195A-1-115, 195A-3-230, and 195A-3-460.

A smaller diameter

drum can be

handled if the

correct size

Diameter Adaptor is

installed. Adaptors

simply lift in and out

of the drum holder.

See Diameter

Adaptor literature.

A 55-gallon plastic

drum can be

handled if the unit

is equipped with

the adjustable

HDPS Bracket

(Part # 1465-P).

This bracket fits

into socket tube on

the drum holder,

and prevents a 55-

gallon plastic drum

from slipping

lengthways.

Model 55/30-16

for 15.5” to 16” diameter drum.

Model 55/30-19 for

18.5” to 19” diameter drum.

The Specialist In Drum Handling Equipment

MODELS 195A-1-115, 195A-3-230,

and 195A-3-460

Kontrol-Karriers with AC Power Tilt