User Manual

The Specialist In Drum Handling Equipment
80A Series
Mobile-Karriers
Copyright 2019 - Morse Mfg. Co., Inc. Spec Sheet F80 (Updated May 23, 2019 11:28 AM) 1
MADE
IN
USA
[e-mail] 103 Kuhn Rd.
Syracuse, NY, 13208 USA
morsedrum.com [phone]
Raise, Transport, Rotate and Drain Drum
Model Description Handle Types of Drums
Domestic
Ship Weight Ship Dimensions
80A
Mobile-Karrier with cinch
chain drum holder
Steel 55-gallon drum 22.5” diameter between ribs
95 Lb
(43 kg)
41” x 36” x 9”
(104 x 91 x 23 cm)
80AM
Mobile-Karrier with cinch
chain drum holder and spark
resistant parts
Steel 55-gallon drum 22.5” diameter between ribs
97 Lb.
(44 kg)
41” x 36” x 9”
(104 x 91 x 23 cm)
80APS
Mobile-Karrier with cinch
chain drum holder for 55-
gallon plastic or steel drum
55-gallon plastic drum 22.5” to 24” (57 to 61 cm) diameter, 34” to 36” (86-92 cm)
tall. Also standard steel 55-gallon drum.
97 Lb.
(44 kg)
41” x 36” x 9”
(104 x 91 x 23 cm)
Mobile-Karrier is More than a Drum Truck
It is a drum handler with many features that make it more
versatile and convenient!
It supports the full weight of your drum and transports it
upright to avoid spills. Automatic handle-locks are designed
to prevent unintentional lowering of the drum. Tilt-locks
on each side may be used to keep the drum upright or
horizontal. Unlocked, the drum may be turned end-over-
end to agitate contents, or may be tipped at an angle for
draining. Locked at horizontal, the drum can remain ready for
dispensing.
Morse Mobile-Karriers are extremely easy to maneuver on 8”
(20.3 cm) hard, “MORTUF” polyolen roller bearing wheels
and 4” (10.2 cm) ball-bearing swivel caster. The frame is
welded structural steel for long service. You can be assured
that Morse quality is built-in when you see the Morse name
cut into the solid steel drum holder.
Made at our factory in East Syracuse, New York U.S.A. and
shipped partly assembled in a durable carton to save you
freight costs.
High Strength
Lifting Components
Mobile-Karriers use high
strength lifting components.
The solid steel band around
the drum has the Morse
name boldly cut through it,
permanently identifying it
as a geniune quality Morse
product.
Morse models 80A, 80AM
and 80APS have high
strength, wear resistant
cinch chain to secure the
drum. The chain tightening
ratchet and spring loaded
pawl assembly has been
designed with oversize,
specially contoured teeth and
redundant safety features for
reliability and ease of use.
Model 80A shown
Use as a drum truck, drain stand, dolly or pump cart•
Self Supporting once loaded - There is no weight in the operator’s hands•
When unlocked, tilt your drum to any angle or turn 360•
0
to agitate
Lock your drum at horizontal to drain•
Lock your drum upright to prevent spills•
Leverage for up to an 800 Lb. (363 kg) drum•
Rolls and steers easily•
Variable lift heights•