User Manual

ManualsBrandsMorse ManualsCarts & TrucksMobile Drum Carrier & Positioner 55 Gal. Polyolefin Wheels

The Specialist In Drum Handling Equipment

MADE

USA

morsedrum.com

80A Series

Mobile-Karriers

One Person Can Handle a Heavy Drum

1. IT’S SIMPLE TO SECURE THE DRUM

Roll the Mobile-karrier forward and push the drum holder into the center of the

drum. The extra strength cinch chain is easily secured across the front of the

drum with the ratchet tightener. No tools are necessary.

2. JUST PULL DOWN THE HANDLE TO RAISE DRUM

The drum is then raised by squeezing the

two handle release rods and pulling the

handle down. Automatic locks engage to

hold drum up as handle is lowered. Tilt

locks hold drum upright.

3. EASY TO MOVE WITHOUT

SPILLING CONTENTS

With the Mobile-Karrier supporting the

load, the operator can quickly and easily

move it to dispensing area. Drum should

always be transported in vertical position

to avoid spilling.

4. YOU CAN DISPENSE FROM ANY POSITION

Tilt locks can be reset to automatically

secure the tilted drum at horizontal for

dispensing, or allow it to be turned as far

as desired. Mobile-Karrier may be left

holding drum for subsequent dispensing,

or the drum may be easily returned to

storage, freeing the Mobile-Karrier for

handling other drums.

Model 80A, 80AM and 80APS have tilt

locks for upright and horizontal positions

only.

Advanced design with improved safety features.•

Simple to lift, move, tilt, agitate and drain heavy drum!•

Adjustable Leverage

You adjust the Morse Mobile-Karrier to do your job with minimum e󰀨ort. Adjust to accomodate drum weights up

to 800 Lb. (363 kg) and oor clearances of 5-1/8” to 11” (13 to 27.9 cm). Tipping capacities vary with type and

amount of load carried.

Morse Drum Holders for Various Drums Sizes

Saddle type A ts a standard 55-gallon (210 liter) steel drum, and is included in the Morse model 80A and 80AM

Mobile-Karriers.

Model with Spark Resistant Parts

Morse drum handlers normally have steel structure, but spark resistant models are made with Monel drum band.

The letter “M” in model 80AM designates the unit is made with spark resistant parts. Stainless steel cinch chain

replaces the standard steel chain.

Model 80A

shown