Operating instructions

4
Installation requirements vary in different districts, and the local building officials have the final
authorization to approve your installation. You should discuss the installation with them before
beginning. Please ask your dealer for further information.
Do not connect to any air distribution duct or system.
Important: If the installation instructions are not followed carefully, it may cause dange-
rous situations like chimney - and house fires. Follow the instructions carefully and do not
deviate from them as it may cause injuries to people or property.
1.1 Unpacking the stove
After removing the outer packaging, flatten it and lay
onto the floor close to the stove; this can then act as
protective work surface during the assembly process.
Next, remove the legs from inside the stove. Carefully
lift the stove from the wooden pallet and gently lay the
stove onto its back and unscrew the heat shield from
the underside of the stove. Now screw the legs and
the Heat shield into position on the underside of the
base. Following the removal of the wooden packaging
the heat shield must be fitted to the underside of the
stove at the same time as the legs utilising the same
fixing bolts. Please see drawing.
The stove should now be lifted and moved into the
upright position, avoiding excess load on the back
legs.
We recommend that two people perform the assembly
and installation procedure. The Morsø 1410 weighs
75 kg.
1.2 Checking loose parts in the stove
After unpacking, check that the center grate (in the
centre of the fire bed) and the fire bricks are firmly
in position and have not shifted in transit. Check also
that the air control works freely.
Standard Accessories
Poker, ceramic flue connection gasket and riddling tool are standard accessories, and can usually
be found in the ashpan or firebox area.
Revisions
Rev.
Sign.:
Title:
Drawing no.:
1:1
1410 NA
Morsø 1400
RSV
28.04.2010
A2
Exploded Diagram
Date of print: 28-04-2010
U:\udv\Tegninger\1400\1400 Samlingstegning.SLDASM
1400-347 a
-
Itemno.:
This drawing is Morsø Jernstøberi A/S' property and must not be sold, lended or copied without any written authorization from the company.
Material:
Weight:
Model no.
Drawingtype:
Location of file:
Scale:
Format:
Released:
Construction:
Date: