Product Card

Specifications subject to change without notice. For further information please contact the sales department.
© MOSA - Viale Europa, 59 - 20090 Cusago (Milano) - Italy -phone +39-0290352.1 - fax + 39-0290390466 E-mail: info@mosa.it Web site: www.mosa.it
MADE IN ITALY
GENERAL INFORMATIONS
EC Directives and Standards Compliance
2006/42 / EC (Machinery Directive)
2014/35 / EU (Low Voltage Directive)
2014/30 / EU (EMC Directive)
2000/14 / EC (Directive Acoustic Emission for machines for use outdoors)
ISO 8528 (Reciprocating internal combustion engine driven alternating current generating sets )
WARRANTY
All devices are covered by the manufacturer’s warranty.
language
PAg 2
09/2017
OPTIONS ON REQUEST
Remote control: RC2
Welding kit (mask, gloves, etc.)
Earthing kit
4 wheel trolley
Road trolley CTV4
Wire feeder
VERSION ON REQUEST
Spark arrestor
DRY WEIGHT:
700 Kg
The welding machine pictured may include optional accessories.
DIMENSION PICTURE
Controller RGK420SA
Emergency stop buttom
Ground fault interruptor
Output sockets CEE: 1x 400V 32A 3P+N+T CEE
1x230V 16A 2P+T CEE
1x115V 16A 2P+T CEE
Siren
Socket thermal switch
Welding process switch
Welding current /voltage regulator
Welding process push button download & upload
Welding digital Ammeter and Voltmeter
Arc force and multi-process parameters setting
SINGLE / DUAL Switch
Remote control connector
Wire-feeder Connector
VRD
Control PAnEl
CONTROLLER CHARACTERISTICS
Operating mode
OFF - ON - REMOTO
Display
Graphic back-light LCD display 52x35 mm
Buttons / controls
Key 3 positions
START button
N° 2 buttons for controller programming
Generator Measures
Voltage : L1-L2-L3-N
Current : I1
Powers : kVA
Frequency
Engine Measures
Engine temperature (optional)
Oil pressure (optional)
Fuel level
Rpm meter
Battery voltage
Maintance
Hours meter
Protections Generator
Short circuit
Over-Undervoltage
Over-Underfrequency
Phase sequence
Asymmetry
Overpowering
Engine Protections
High engine temperature warning
Low oil pressure warning
Low fuel level warning
High / Under battery voltage
Battery charge alternator failure
Start failure
Stop failure
Emergency stop
Features 5 languages dysplay: GB
- I - F - E - D
Remote Start and Stop
Pre-heating
Fully programmable from the panel, PC, WI-FI
or NFC
Manual operation with remote start (REM)
IP 40 protection
Operation temperature: -30°C / +70°C
Communication
Setup USB port
CAN BUS interface (J1939 only)
CONTROL PANEL - WEIGHT
DIMENSIONS & ACCESSORIES
TS 2x280 EVO LULTI4