Product Manual

02/02/06 M21_EP6-GB_TF
M
21
REV.0-10/13
START AND STOP (EP6)
I
GB
F
NOTE
Do not alter the primary conditions of regulation
and do not touch the sealed parts.
NOTE
For safety reason the key must be kept by qualied
personel.
CAUTION
RUNNING-IN
During the rst 50 hours of operation, do not use
more than 60% of the maximum output power of
the unit and check the oil level frequently, in any
case please stick to the rules given in the engine
use manual.
CAUTION
MACHINE WITH EMERGENCY BUTTON
Pressing the button the engine will stop immedia-
tely in any working condition.
Turn clockwise to reset the button.
!
!
!
!
The starting of the lighting tower can be effected in 2
different modes:
1) Start with EP6 key (Engine Control)
Put the “Local/Remote” selector on Local. Turn the
key on “ON”, the EP6 display shows, only on the
machines with mounted glow plugs for 5 secs, the
symbol “UUUU”, then the message “Sta” appears
the engine can be started, for then turn the key
on “start” and start the engine.
On the display the word “Sta” remains for about
20 sec then automatically disappears; the engine
must be started within 20 secs, otherwise the EP6
blocks the starting and on the display the word
“fail” appears. Turning the key on “OFF” the EP6
is reset and a new starting cycle can be xed.
Stop:
it is COMPULSORY to disconnect the load rst,
then to stop the engine turn the key on “OFF”.
2) Remote starting with TCM35
Put the “Local/Remote” selector on Local. Con-
nect TCM35 to the plug on the front panel and put
the switch on “0”.
Turn the key on ON in the EP6, wait for the various
signals to go out then press the button “AUTO” in
the EP6 until the led “AUTO” ashes.
Shift the switch on “I” in the TCM35 and automati-
cally the starting cycle will start. On the machines
with mounted glow plugs appears in the display
EP6 (for about 5 secs), the symbol “UUUU“; the
starting cycle includes 3 starting trials.
When the engine starts the led “AUTO” remains lit
continuously and simultaneously the red warning
light will light in the TCM35.
Stop:
it is COMPULSORY to disconnect the load rst,
then shift the switch of the TCM35 on “0”, the
engine will stop immediately.
Check daily