User's Manual

ManualsBrandsMosaic Alarm ManualsElectronicsWireless Door & Window Alarm

User Manual of MH107

1. Product Features

Name: Wireless Door & Window Alarm

Working voltage: 3V

Standby current: 100uA

Working current: 50mA

Power: 0.15w

1. Type: magnetic induction

2. Sounds an alarm when somebody opens the door or window illegally.

3. Can be free controlled by the wireless remote control.

4. A password of 3 digits can be set, and it won't be lost even if power off.

5. Zone control function. Multiple devices can be controlled by the remote

control at different zones

6. Siren on/off setting

7. Setting of reminder sound when door not closed

8. Setting of reminder sound when door not locked

9. "DING DONG" sound when linked with MH101 Door Phone for use.

10. Triggers MH102 Video Camera to take videos when linked with it for use.

11. RF on/off setting

12. Lock the keypad automatically when entering wrong password 5 times.

13. Sounds an alarm after 4 seconds when triggered.

14. LED indicator when battery low

15. Still sounds an alarm even in the environment of strong magnetism.

Summary of content (6 pages)

PAGE 1
User Manual of MH107 1. Product Features Name: Wireless Door & Window Alarm Working voltage: 3V Standby current: 100uA Working current: 50mA Power: 0.15w 1. Type: magnetic induction 2. Sounds an alarm when somebody opens the door or window illegally. 3. Can be free controlled by the wireless remote control. 4. A password of 3 digits can be set, and it won't be lost even if power off. 5. Zone control function. Multiple devices can be controlled by the remote control at different zones 6.
PAGE 2
. Installation and Use 1.Take out the insulating piece, and you will hear one "bi", which means correct insert of the battery. 2.Tear off the protection paper of 3M adhesive tape on the back of MH107, and stick the magnet part parallel to the alarm, ensuring the gap to be less than 1cm. 3. Function setting Password setting Password setting n * Default password is "1 2 3" d when door not closed 1) . ARM Press "3" on the keypad and we will hear one beep. 20 seconds later it is ARMED 2) .
PAGE 3
flashes 3 times. In this case, MH107 can work with other wireless units. 2) .OFF Enter the password "xxx" and enter "2112" to turn the RF function off. Red light flashes 3 times. In this case, MH107 can't work with other wireless units and it will work individually Siren on/off 1 ).ON Enter the password "xxx" and enter "2121" to turn the siren on. Red light flashes 3 times. When MH107 is triggered, the siren will sound. 2) .OFF Enter the password "xxx" and enter "2122" to turn the siren off.
PAGE 4
. Reset to default factory Open the battery cover and take out the battery. After 3 seconds, press and hold the learn code key, and insert the battery. When you hear three beeps, it has been reset to default factory. Default password is "1 2 3" 5. Pairing two MH107, Divide into different zones With the help of the remote control, you can pair two units to be divided into different zones and managed separately by the same remote. a.
PAGE 5
remote control for 3 seconds, the red light of the remote control will flash and beeps twice. Zone "2" is set successfully. The button “2 ” can arm/disarm alarm unit "2" installed at Zone 2. 6. Remark 1).Every step of button operation must be completed within 5 seconds. 2 ).When you enter the password wrongly for 5 times, MH107 sounds a 2-second beep and 10 beeps, and the keypad will be locked for 5 minutes. After that time, you can use the remote control to unlock the keypad and re-enter the password.
PAGE 6
Examples of RF Exposure statement: This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. FCC ID: ZAX5E-MH107 This device complies with part 15 of the FCC rules.