User's Manual

2. System Description 2-3
© 2012 Moseley, Inc. All Rights Reserved. 602-16620-01, Rev. A
Component/Feature Benefits Advantages to Providers/Customers
point networks.
In the event of an outage, traffic is
automatically rerouted via another
part of the ring without service
interruption.
Increases deployment scenarios for initial
deployment as well as network expansion
with reduced line-of-sight issues.
Ring/consecutive point networks can
overcome line-of-sight issues and
reach more buildings than other
traditional wireless networks.
Increases network reliability due to self-
healing redundancy of the network.
Networks can be expanded by adding
more IDUs or more rings, without
interruption of service.
Minimizes total cost of ownership and
maintenance of the network.
A separate management channel
allows for a dedicated maintenance
ring with connections to each EVENT
5800 on the ring.
Allows for mass deployment.
Adaptive Power Control Automatically adjusts transmit power
in discrete increments in response to
RF interference.
Enables dense deployment. Simplifies
deployment and network management.
Comprehensive
Link/Network
Management Software
A web interface offers security,
configuration, fault, and performance
management via standard craft
interfaces.
Simplifies management of radio network and
minimizes resources as entire network can be
centrally managed out of any location.
Suite of SNMP-compatible network
management tools that provide
robust local and remote
management capabilities.
Simplifies troubleshooting of single radios,
links, or entire networks. Simplifies network
upgrades with remote software upgrades.
Allows for mass deployment.
2.2 System Features
 Selectable Rates and Interfaces
o PDH Options: Up to 16 x E1/T1, 100BaseTX/Ethernet (Scalable 1-100 Mbps), DS-
3/E-3/STS-1 (option; consult factory for availability)
o Super PDH Options: Up to 32 x E1/T1, 100 BaseTX/Ethernet (Scalable 1-100
Mbps)
o Ethernet Options: 100 BaseTX/Ethernet (Scalable 1-155 Mbps),
1000BaseTX/Ethernet (Scalable 1-300 Mbps)
o SDH Options: 1-2 x SDH STM-1/OC-3 SONET
 Support for multiple configurations for both PDH and SDH
o 1+0, 1+1 protection/diversity
o Hot Standby
o East/West Repeater (2 + 0)
 Selectable Spectral Efficiency of 0.8 to 6.25 bits/Hz (including FEC and spectral
shaping effects)
 QPSK, 16–256 QAM Modulation
 Powerful Trellis Coded Modulation concatenated with Reed-Solomon Error Correction
 Built-in Adaptive Equalizer
 Support of Data Orderwire Channels
o Up to 19.2 kbps asynchronous RS-232