User's Manual

8. Connectors 8-3

8.8 Alarm/Serial Port Connector

DB-15HD Female PIN TYPE SIGNAL

1 OUTPUT TTL Alarm Output 3

2* INPUT/ Output RS-232 RX/TX

3* OUTPUT/ Input RS-232 TX/RX

4 OUTPUT TTL Alarm Output 4

5 N/A GROUND

61** N/A Alarm 1 Form C Contact Normally Open

7** N/A Alarm 1 Form C Contact Normally Closed

8** N/A Alarm 2 Form C Contact Common

9 INPUT TTL Alarm Input 1

10 INPUT TTL Alarm Input 3

11** N/A Alarm 1 Form C Contact Common

12** N/A Alarm 2 Form C Contact Normally Open

13** N/A Alarm 2 Form C Contact Normally Closed

14 INPUT TTL Alarm Input 2

15 Input TTL Alarm Input 4

* Pins 2 and 3 are hardware jumper configurable for DCE or DTE operation.

** Form C Contacts are hardware jumper configurable to emulate TTL outputs

Mating Connector: HD-DSUB15 Male (15 pins in a DB9 shell)

Ordering Information: Norcomp Part Number 180-015-102-001 or equivalent

8.9 T1/E1 Channels 1-2 Connector

RJ-48C Female PIN TYPE SIGNAL

100  /120  Balanced

1 INPUT RX+

2 INPUT RX-

3 N/A GND

4 OUTPUT TX+

5 OUTPUT TX-

6 N/A GND

7 N/A N/A

8 N/A N/A

Mating Connector: Standard RJ-45 Plug

Ordering Information: Tyco Electronics/Amp Part Number 5-554169-3 or equivalent