User's Manual
Table Of Contents
- 1.Safety Precautions
- 2.System Description
- 2.1About This Manual
- 2.2Introduction
- 2.3System Features
- 2.4Physical Description
- 2.5System Description
- 2.6Consecutive Point Architecture
- 2.72 + 0 (East-West) Configuration
- 2.8Spanning Tree Protocol (STP)
- 2.91+1 Protection
- 2.101 + 1 Multi-hop Repeater Configuration
- 2.11Data Interfaces
- 2.12Crosspoint Switch
- 2.13Power Management
- 2.14Event-HD Software and Network Management
- 2.15System Loopbacks
- 3.Installation
- 3.1Unpacking
- 3.2Notices
- 3.3PRE-INSTALLATION NOTES
- 3.4Back-to-Back Bench Testing
- 3.5Overview of Installation and Testing Process
- 3.6Site Evaluation
- 3.7Installation of the Event-HD
- 3.8Quick Start Guide
- 3.9SDIDU™ Service
- 4.Summary Specification
- 5.Rear Panel Connectors
- 5.1DC Input (Power) Connector
- 5.2Ethernet 100BaseTX Payload Connector 1-2
- 5.3SONET Payload Connector
- 5.4STM-1 Payload Connector
- 5.5DVB/ASI, DS-3, E-3, STS-1 Payload Connector
- 5.6NMS 10/100BaseTX Connector 1-2
- 5.7Alarm/Serial Port Connector
- 5.8ODU Connector
- 5.9T1/E1 - Channels 1-2 Connector
- 5.10T1/E1 - Channels 3-16 Connector
- 5.11USB
- 5.12Voice Order Wire
- 5.13Data Order Wire
- 6.Appendix
2. System Description 1
2.System Description
2.1About This Manual
This manual is written for those who are involved in the “hands-on” installation of the
EVENT HD in a microwave point-to-point link, such as installation technicians, site
evaluators, project managers, and network engineers. It assumes the reader has a basic
understanding of how to install hardware, use Windows based software, and operate
test equipment.
2.2Introduction
The Moseley family of digital radios provides high capacity transmission, flexibility,
features, and convenience for wireless digital communications networks. The Moseley
digital point-to-point radios represent a new microwave architecture that is designed to
address universal applications for video, audio, data, PDH and SDH platforms. This
advanced technology platform is designed to provide the flexibility to customers for their
current and future network needs.
The Moseley EVENT HD is a digital microwave radio terminal composed of a Software
Defined Indoor Unit™ (SDIDU™) and Outdoor Unit (ODU). The SDIDU is common to all
product lines whereas the ODU, the radio transceiver unit which establishes the
frequency of operation, is selected by application and model. The ODU is fully
interchangeable covering the licensed 2, 7, 13, 18, and 23 GHz bands as well as the
unlicensed 5.3 and 5.8 GHz ISM bands. Some applications are:
Broadcast STL (Studio-to-Transmitter Link) and BAS (Broadcast Auxiliary Service) for for
licensed half-duplex applications, FCC part 74.602, for data rates to 150 Mbps,
2 GHz band between 1990 to 2110 MHz in 12 MHz and 17 MHz channels.
6.5 GHz band between 6425 to 6525 MHz in 25 MHz channels.
7 GHz band between 6825 to 7125 MHz in 25 MHz channels.
13 GHz band between 12.7 to 13.25 GHz in 25 MHz channels.
© 2007 Moseley, Inc. All Rights Reserved. 602-14886-01, Rev. A