Repair manual

Mosquito Magnet© DEFENDER / LIBERTY Troubleshooting & Repair Steps
Page 6 of 13
Figure 6 – Remove screws holding the LP line in place.
Figure 7 - remove all three screws holding
the combustion chamber in place.
Figure 8 – Fan housing
Figure 9 – Two screws holding the housing
to the Combustion Chamber.
Figure 10 – Remove the LP hose.
Figure 11 - Lp Hose and regulator
Figure 12 – Remove all 5 screws holding
the combustion chamber halves together.
Figure 13 – Heating the combustion chamber
seam.