Specifications

Installation instructions
The device comes with a double-sided adhesive tape. Please tear off the tape and gently
press the device to a reliable surface.
Charging
The device should be charged with a 1A 5V DC USB C Charger. This charger does not
come with the product. Charging is disabled in temperatures outside of 0 - 45°C (32 -
113°F).
Operational instructions
Press the button for 3 seconds until a constant green light is shown. The device is pre-
configured and operates automatically on 2G and LTE-M networks and may optionally be
configured to communicate with external BLE sensors through the cloud interface.
The device collects sensor data every 10 minutes, that are stored on the device’s internal
memory and are uploaded on set frequency. Standard configuration performs uploading over
the mobile network every 1 hour.
The device is equipped with GNSS to accurately determine its position in order to correlate
sensor readings with time and place.
Safety Precautions
- The device should be opened only by qualified service personnel.
- Never pour any liquid into an opening. This may cause fire or electrical shock.
- Do not crush, puncture, short external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures higher than 60°C (140°F).