Specifications

Page 11
MoTeC Mini Display Dash
The display is a DOT Matrix backlit graphics LCD which allows the MDD to
support a number of different display layouts to suit various applications. The
MDD is small enough to be mounted on the steering wheel or it may be mounted
in a more traditional location using 2 sided tape or Velcro. The MDD and its
outputs are fully controllable when the MDD is used in conjunction with the
ADL. When used with an ECU, the MDD features predefined display screens. A
Switched input to the MDD allows the user to toggle through the different display
screens on the MDD.
• Weighs120 gms (1/4 pound)
• Robust aluminum enclosure
• W X L X H = 3.38 X 2.34 X .86 inches
• Max Current Requirement 150mA @14volts
• For use with ADL Dash Logger or with a MoTeC ECU
• Receives data via serial or CAN bus
Mini Dash Display
P/N: M MDD-1
$1,735.00
Expansion Boxes
E888 and E816 add additional I/O to your system. They talk to the Dash
over the CAN bus so only 2 wires must be routed to the dash from either
the E888 or E816. Each device features its own 0v and 5v references to
monitor its own sensor inputs.
E888 contains:
- 8 Thermocouple inputs
- 8 Analog Voltage inputs
- 4 Digital Inputs
- 2 Switched Inputs
- 2 Cold Junction Compensation Inputs
- 8 PWM Outputs
P/N: M E888
$1,301.00
E816 Contains:
- 16 Analog Voltage Inputs
- 4 Digital Inputs
- 2 Switch Inputs
- 2 Thermistor Inputs
- 8 PWM Outputs
P/N: M E816
$1,411.00
Option - Integrated Switch Assembly -
add $200.00