Specifications

Page 15
TPS Input - varying voltage can use any sensor
MAP Input - varying voltage can use any sensor
Engine Temp - can be used for any temperature air, oil, head or water
Air Temp - can be used to measure air, oil, water or head temp
Aux Temp - EGT, Oil Temp or Trim Knob etc.
Aux Voltage - Baro Pressure, Oil Pressure etc.
2 X Digital/Switch Inputs - clutch sw, a/c request or wheel speed etc.
Cam/Crank Input Hall and Mag
1 Lambda Input
8 Injector Outputs (7 & 8 Can be used for Aux Functions on 6 or less cylinders)
2 Ignition Outputs - if 1 output is used (IEX, CDI-8 etc) other output is Auxiliary
3 Auxiliary Outputs (cooling fan, fuel pump, wastegate etc..)
TPS Input - varying voltage can use any sensor
MAP Input - varying voltage can use any sensor
Engine Temp - can be used for any temperature air, oil, head or water
Air Temp - can be used to measure air, oil, water or head temp
Aux Temp - EGT, Oil Temp or Trim Knob etc.
Aux Voltage - Baro Pressure, Oil Pressure etc.
2 X Digital/Switch Inputs - clutch sw, a/c request or wheel speed etc.
Cam/Crank Input Hall and Mag
1 Lambda Input
8 Injector Outputs (7 & 8 Can be used for Aux Functions on 6 or less cylinders)
2 Ignition Outputs - if 1 output is used (IEX, CDI-8 etc) other output is Auxiliary
3 Auxiliary Outputs (cooling fan, fuel pump, wastegate etc..)
MoTeC ECU’s con’d
P/N: M4 SEQ
$2,103.00
P/N: M48 SEQ
$2,472.00
6 HRS FREE WIDEBAND LAMBDA and LOGGING
3 Temperature inputs
3 Voltage inputs
Narrowband Lambda sensor inputs
Hi/Low Injection control
2 Digital inputs
4 injector drivers
4 ignition drivers (3 ignition drivers are re-assigned Auxiliary outputs)
4 aux outputs
32bit Microprocessor
Field upgradeable
Fully Programmable
P/N: M M24
$1,724.00
P/N: M MLS
$1,534.00
The MLS Ecu
is dedicated to LS
and Lexus V8s
The M2R Ecu
is dedicated to
2 Rotor engines