Specifications

Page 20
This GPS device is based on a GPS engine from Hemisphere
GPS. It provides a true non-interpolated 10 Hz or 20 Hz output
enclosed in a motorsport aluminum case. Serial output conforms
to NMEA standard RS-232 protocol at 57600 baud rate. There is
also a speed output pulse for applications that don’t accept serial
data. This item is replacing the Real Time Clock with GPS addon.
Transmitters and receivers offer 1,000 different codes,
to avoid conflicts with competitors’ beacons.
To change channels on the transmitter, simply open the cover by removing the
screws and adjust the dip switch inside to the desired channel. The BR-2 can be
configured using the Dash Manager software and the Beacon Configuration Utility
which comes with Dash Manager
Beacon Reciever 2 - Autosport
microterm connector
CAN capable with increased accuracy
P/N: M ADL BRX-2
$640.00
MoTeC Beacon Transmitter and Receiver
1,000-channel IR beacon transmitter
Includes cable, angle bracket
for 1/4² camera mount.
Transmitter sets up on the track.
P/N: M ADL BTX
$683.00
MoTeC GPS
P/N: M GPS BL
$900.67
With upgrade from 10 Hz to 20 Hz
$1,635.67
Specifications:
12-channel GPS engine.
Horizontal accuracy < 1 meter at 95%
Update rate of 10 Hz or 20 Hz optional.
Screw on SMA antenna connector.
57600 baud serial, other rates available upon request
NMEA standard $GPGGA and $GPRMC data
Digital output pulse: 0-5v 50% duty cycle
94 Hz per 1 m/s
940 Hz per 36 km/h
1933 Hz per 46 mph
(can be connected to inputs which have a 12v pull up
resistor but output will still be 0-5v square wave)
Power Requirements:
Supply Voltage: 6 to 18 VDC
Current Consumption: 380 mA at 12v
Environmental:
Temperature Range: -30° to 70° C
Housing Material: 6061 Aluminum
Dimensions: 3.95 in x 2.7 in x 0.9 in
100 mm x 69 mm x 23 mm
Weight: 157 grams w/o antenna