Specifications

Page 32
Power Supply
Power Distribution Modules
MoTeC PDMs are designed to replace conventional relays, fuses and circuit
breakers by providing electronically switched power to the various electronical
systems in the vehicle, including motors, lights, solenoids and electronic devices
such as ECUs and data systems. It also provides full diagnostic information,
including output currents and voltages, and error status that can be monitored
on a PC or transmitted via CAN to a display or logging device.
1. PDM16 Power Distribution Module
8 20A outputs and 8 8A outputs which can be paralleled for higher currents.
Built in short circuit and thermal overload protection.
P/N: M PDM16
$3,160.00
2. PDM32 Power Distribution Module
8 20A outputs and 24 8A outputs which can be paralleled for higher currents.
Built in short circuit and thermal overload protection.
P/N: M PDM32
$5,228.00
Fluid Level Sensor
Electronic Sending Unit For Fuel, Oil, and
Potable Water
Fluid level sensor.
Length = 14-inches.
Output Voltage = 0-5 volts.
P/N: M P155-CGO-14
$160.00
This ELECTRONIC SENDING
UNIT for FUEL, OIL, and
POTABLE WATER tanks provides a
continuous readout of the liquid
level in your tank
PDM16
PDM32