Specifications

Page 38

Manifold Pressure Sensors

1. Press. transducer, 500 kPa (60 PSI boost)

P/N: M P155-75A-E3C

$223.40

2. Adapter Harness to go from GM type 2-3 Bar Map to

Kavlico

P/N: M P155 75A ADAP

$27.04

3. Pressure sensor, 100 kPa

P/N: M 16-7039

$62.40

4. Barometric Pressure sensor, 108 kPa

P/N: M 16-6835

$82.00

5. Pressure sensor, 200 kPa (15 PSI boost)

P/N: M 16-9886

$62.40

6. Pressure sensor, 300 kPa (30 PSI boost)

P/N: M 16-0749

$62.40

7. Billet mount, blue w/filter

Accepts any M16 sensor

P/N: M 16-SENMNT-BL

$59.33

8. Billet mount, black,

Accepts any M16 sensor

P/N: M 16-SENMNT-BK

$59.33

How to Calibrate a Pressure Transducer

The Pressure Transducer which MoTeC offers for measuring pressure all output signal voltages beginning at .5 volts and ending at 4.5 volts.

The range of the sensor is relateable to the AtoD counts in an ECU in the following way. At the bottom of the range, the sensor outputs .5

volts which is equivalent to 102 counts. At the top of the sensor’s range, it outputs 4.5 volts or about 922 counts. If you interpolate the

calibration table between these two points, you will have the correct calibration for the sensor - no matter what the range is.