Specifications

Page 8
T
he MoTeC Professional Lambda Meter (PLM) determines
exhaust gas mixture strength over a wide range of conditions
with a fast response time. Quick and easy to use, it allows a
calibration engineer all the power and configurability required for OE
emissions development and certification work.
T
he MoTeC PLM provides a differential analog-voltage output
that connects to an analog meter or measurement
instrument such as data logger or chart recorder. Define output
as linear or non-linear in relation to the measured units. The PLM also
supports 1mbit CAN and RS232 data links to devices such as the
MoTeC dash/logger for transmission of sensor and diagnostic data.
Comprehensive diagnostic, status channels are provided for.
The PLM can be used as Lambda input for an ECU!. Instead of
purchasing the Lambda Upgrade on M4/M48 - the PLM’s definable
output voltage can be used as the input for Lambda on these ECU’s.
This gives you the use of a more state of the art sensor with a digital
display which you can place on your dashboard for viewing even if the
ECU is offline. Of course you can then use this lambda meter on any
other car you wish.
Professional
Lambda Meter
Specifications:
• Weighs135 gms
• Robust aluminum enclosure
• Operating range 0.70 and 32.0 lambda (for gasoline/
petrol this equals air/fuel ratio range of 10.3:1 to
470:1)
• Display lambda, air/fuel ratio, or oxygen percentage
for any sensor-compatible fuel
• Define display resolution (in decimal points), update
rate, filtering, backlight intensity
• Easy Air calibration using PLM Software (no twisting
of screws or watching LED’s required)
Kits come with Sensor, Harness, Software, O2 Bung,
Comm Cable and Users Manual
Professional lambda meter with Bosch LSU lambda
sensor or NTK Pro Uego lambda sensor.
P/N: M PLM
CALL FOR CURRENT PRICES